Wire-to-wire/wire-to-board connectors-supplier of various series of wire-to-wire/wire-to-board connectors in the industry

Professional production / sales of wire-to-wire / wire-to-board electronic connectors - we provide the industry's various series of wire-to-wire / wire-to-board connector products; agent sales of brands: TE|MOLEX|JST|HRS|JAE|HONDA|JCT|Amphenol|Yazaki|APTIV|Yeonho, etc.; to provide the main pitch of the product: 1.0mm, 1.25mm, 1.5mm, 2.0mm, 2.5mm, 3.96mm, 4.2mm, 6.2mm, etc., we can provide non-standard pitch according to customer requirements; at the same time, we can provide customized non-standard pitch; at the same time, we can also provide the customer with the requirements of the customer, 1.25mm, 1.5mm, 2.0mm, 2.5mm, 3.96mm, 4.2mm, 6.2mm, etc. We can provide non-standard pitch according to customer requirements; at the same time to provide a replacement for some TE|MOLEX|JST|HRS|JAE and other brands of WTW / WTB connector products.
1、What is a wire-to-wire connector? :
 Wire-to-wire connectors are used to connect two active devices; wire-to-wire connectors include a wire-to-cable or cable-to-cable form, the defining characteristic of two single wire individuals or two cables in the corresponding conductors are connected to each other sexually. The equivalence connection is more commonly found in fixed connections in wire-to-wire connections and IDC connections.
Wire-to-wire connectors come from:
Connector by classification there are three most basic types of wire-to-wire, wire-to-board and board-to-board. These three types of connections are not distinctly different. The following two reasons can explain the overlap of such types. First, the same connector design can be redefined with only minor changes in the connection method to a new design that can be applied to another type of connection; second, a cable can be assembled with a wire-to-wire connector on one end and a wire-to-board connector on the other, for example, the I/O connector Class 5 profile is the most common example. If you avoid the ambiguity of the category of this connection form and not to mention, the connection form just provides a valid basis for the classification of connectors.
Introduction to how wire-to-wire connections are made:
Curly connection is commonly used in discontinuous wire connectors, IDC because of its superiority in relation to the wire and the end of the harness processing and commonly used to dominate the cable connector, wire-to-wire connectors have a variety of geometric plastic support parts such as right-angle and circular polymeric shape of the plastic parts, there are many different shapes of the combination of plastic parts and metal shielding shell, mainly in military applications.
Wire-to-wire connector features:
Wire-to-wire connectors supply information, you can also show here for free sales wire-to-wire , and by T6 heat treatment, the appearance of stainless steel pill sandblasting treatment, with good air tightness, beautiful appearance and other characteristics of easy to operate and install, convenient to achieve the effect of never leak odor, eliminating the old above-ground, underground water storage bend cumbersome installation and maintenance and connections, wire-to-wire connectors family contains rectangular, round, wire-to-wire The market outlook for connectors ultra-small-D and ribbon connectors. Coaxial connectors also belong to this family, but their design features for high frequency use will be discussed separately later.
Wire-to-wire connector applications:
Its products are used in a wide range of applications such as automotive, communications, consumer electronics, data processing, industrial machinery, etc. Applied to auxiliary circuits, AMP connectors are at the forefront of technology, and AMPEconomyPower (EP) wire-to-board connection systems are designed for auxiliary circuit applications.

---------------------------------------------------------------------------------------------------

2、What is wire-to-board connector? :
Wire-to-board connectors, the so-called wire-to-board connectors are connectors that connect wires and circuit boards, the function of the connector is mainly in the transmission of power and signals, so wire-to-board connectors can be said to be the originator of all linkers, depending on the various uses and requirements of the different types of wire-to-board countless, but most of the information industry is to pin the distance and the transmission of current and voltage to distinguish. Wire-to-board connectors support four basic data transmission modes: manipulated transmission, isochronous transmission, abort transmission and data block transmission. Each transmission mode has different properties when applied to terminals with the same name. The wire-to-board connectors are all fully waterproof and dustproof and are available in wire-to-wire and wire-to-board versions. They extend the popular sealed IP67-rated wire-to-board connectors to include D-Sub, USB, HDMI, wire-to-board and wire-to-wire wire-to-board connectors, and support low-level flags and power requirements up to 300V. The dramatic increase in automotive infotainment and safety options is the catalyst for vehicle manufacturers who demand suppliers to supply smaller interconnect products. Design engineers must fit more electronic installations in the opposite space, and by using smaller pin and terminal sizes, unsealed wire-to-board fragments allow equipment manufacturers to fit circuits in tighter spaces while reducing costs and maintaining functionality, safety and reliability.

---------------------------------------------------------------------------------------------------

3、What are the wire-to-board connector pitches? :
 With the increasing precision of electronic equipment, connector development has also shown a clear narrow pitch, integrated features. Various electronic systems control functions and complexity are increasing, corresponding to the connector products to take into account the stability at the same time need to achieve a narrower pitch and higher integration. For example, industrial control equipment general board-to-board connectors from the past 2.54mm, 2.0mm, 1.27mm gradually transitioned to 0.8mm, 0.635mm, 0.3mm pitch, while the line to board I/O connector also shows a clear trend of narrow pitch, the latest micro I/O connector compared to the standard I/O connector volume is smaller and more stable. Wire to board connectors common pitch 1.0mm, 1.25mm, 1.5mm, 2.0mm, 2.5mm, 3.96mm, 4.2mm, 6.2mm, etc., the non-standard pitch can be customized according to customer requirements

---------------------------------------------------------------------------------------------------

4, our company produces / sales of wire-to-wire / wire-to-board connector products part of the physical picture (picture for reference only):

---------------------------------------------------------------------------------------------------

5、How to buy or know about wire-to-wire/wire-to-board connector products? :
3A Electronics -- manufacture/sales of [wire-to-wire/wire-to-board connector products]; If you want to buy or know what wire-to-wire/wire-to-board connector product solutions we can provide, please feel free to contact us through the following ways.