How are circular connectors produced?

Category:Knowledge       

Professional sales agent to provide: connectors|wire harness|cable products

Circular connectors have a wide range of applications, it is not only in the field of machinery manufacturing, industrial automation is used, but also in the field of information control technology is often used, this is because it can help users to save a lot of installation time, reduce the cost of production, and improve the ease of use, so you know how it is produced? Here we introduce the production process.
1, stamping
  Circular connectors in the production process, generally tend to start from stamping pins. Through the use of large high-speed stamping presses for stamping can be a thin metal strip stamping pins, a large roll of metal tape end of the conveyor to the front part of the stamping press, as for the other end, you need to go through the hydraulic press table wrapped into the tape wheel, and then by the tape wheel to pull out the metal tape and rolled up, so that you can complete the production of pins.
2、Electroplating
  Connector pins need to be sent to the electroplating process stage immediately after the completion of stamping. Electroplating is in the product surface plated with a variety of metal coatings. And stamping stage box type of a part of the production, such as pins of the twisted, broken or deformed need to move the knife plating equipment.
  Plating although the surface of the product can become bright, improve the corrosion resistance of the product, but through the test can be found on the surface of the plating there will be some defects, such as pinholes, scratches, so some connectors need to be plated on the pins of multi-layer metal.
  The production process of circular connectors is relatively complex, there are many steps, today we will briefly introduce a few of these steps, and later have the opportunity to introduce you to other production processes and steps.

30.jpg

---------------------------------------------------------------------------------------------------

About 3A Electronics Brief description of the products sold on the platform:

3A Electronics-- professional agent / production / sales of a variety of 【Connector|Harness|Cable products】; If you have the above article [Connector|Harness|Cable products] requisition needs; or want to buy / understand what we can provide specific Connector|Harness|Cable product solutions, please contact our business people below!

    World Trade Electronics Network

    Our contact information

  • Mr.zhang
  • Phone: +86 18012695035
  • Tel: 86 512 57888959
  • Email: King_Zhang@jkfconn.com
  • Whatsapp: 18012695035
  • QQ: 3377584302
  • Skype: Benz_009
  • Address: 江苏省昆山市玉山镇北门路3199号

世贸电子产品网.jpg